So nähen Sie in 6 einfachen Schritten einen Reißverschluss ohne Reißverschlussfuß

Sewing a zipper into your garments or accessories can be a daunting task, especially if you do not have a zipper foot. However, fear not! While a zipper foot is a handy tool designed specifically for this purpose, you can still achieve a neat and professional-looking zipper installation without one.
In this step-by-step guide, we will explore alternative techniques that will help you sew a zipper without a zipper foot, using basic sewing tools commonly found in your sewing Bausatz. So, let’s dive in and master this essential sewing skill.

Basic Parts of a Zipper

The basic parts of a zipper include:

1. Zipper Tape: This is the long, narrow fabric strip that runs on both sides of the opening where the zipper is attached.

2. Zipper Teeth: These are the interlocking metal or plastic components that create the closure. The teeth on one side of the zipper mesh with the teeth on the other side to fasten the zipper.

3. Slider: The slider is the movable component that opens and closes the zipper. It has a tab or a puller attached to it, which allows you to grip and manipulate it. When you move the slider, it pushes the zipper teeth together or apart to open or close the zipper.

4. Zipper Stops: These are the small metal or plastic pieces located at the top and bottom ends of the zipper. They prevent the slider from coming off the zipper tape when fully opened or closed.

5. Zipper Puller or Tab: This is the part attached to the slider that you hold onto when opening or closing the zipper. It can be a small tab or a larger decorative pull that facilitates easy gripping.

6. Top Stop: The top stop is the specific type of zipper stop located at the top end of the zipper, preventing the slider from going past that point.

7. Bottom Stop: Similarly, the bottom stop is the type of zipper stop located at the bottom end of the zipper, preventing the slider from going past that point.

These are the essential components of a zipper, and they work together to provide a secure and reliable method of fastening garments, bags, and various other items.

Benötigte Materialien

Before we begin, gather the following materials:
1. Fabric
2. Zipper
3. Nähmaschine
4. Pins
5. Fabric Marker or Chalk
6. Sewing Needle
7. Thread
8. Schere

How to sew a zipper without a zipper foot?

To sew a zipper without a zipper foot, follow these step-by-step instructions:

Step 1: Prepare Your Fabric

Begin by preparing your fabric pieces for zipper installation. Ensure that you have two fabric panels where you want to attach the zipper. Mark the desired zipper placement on the wrong side of the fabric using a fabric marker or chalk. 

Step 2: Pin the Zipper in Place

Place the zipper on the right side of one fabric panel, aligning the zipper teeth with the marked placement. Secure the zipper temporarily with pins. Position the other fabric panel right side down on top of the zipper, matching the raw edges. Pin all the layers together, ensuring that the zipper stays in place.

Step 3: Sewing the Zipper

Without a zipper foot, you can use a regular presser foot or a narrow presser foot to sew the zipper. Start by positioning your fabric under the presser foot, aligning it with the zipper teeth. Stitch as close to the zipper teeth as possible, taking care to remove the pins as you sew. If using a regular presser foot, you can gently push the zipper teeth away from the foot with your fingers to prevent the needle from hitting them.

To sew the zipper, you can use a straight stitch or a zipper stitch, depending on your preference. For a straight stitch, set your Nähmaschine to a straight stitch and adjust the stitch length to around 2.5mm. Sew from the top of the zipper down to the bottom, ensuring a straight and even seam.

Step 4: Reinforce the Seam

To reinforce the zipper seam and prevent any potential unraveling, sew over the zipper seam again. This time, sew approximately 1/8 inch away from the original stitching line. This additional stitching will provide extra strength to the seam.

Step 5: Finishing Touches

Once the zipper is securely attached, it’s time to finish the seam. With the right sides together, sew the remaining seams of your project, ensuring that the zipper tape is neatly sandwiched between the fabric panels. Use a regular presser foot and sew from the bottom of the zipper to the edge of the fabric.

Step 6: Finishing the Ends

Finally, finish the raw ends of the zipper tape by folding them inward and stitching across the bottom edge to secure them. Trim any excess zipper tape, ensuring that it is neatly tucked away within the fabric.

To watch a great video on how to sew a zipper without a zipper foot, check this out:

Zusammenfassung

While a zipper foot is a valuable tool for sewing zippers, you can still achieve excellent results without one. By following this step-by-step guide and using basic sewing tools, you can sew a zipper into your projects neatly and professionally. Remember to take your time, be patient, and practice the techniques to improve your sewing skills. With practice, you’ll become proficient in sewing zippers even without a specialized foot, opening up a world of creative possibilities for your sewing projects.

Häufig gestellte Fragen

---

Empfohlene Beiträge