Offenlegung des Partners: SewingInsight.com ist Teilnehmer des Ebay Partner Network und des Amazon Services LLC Associates Program. Durch die Verlinkung auf Produkte bei Ebay und Amazon verdienen wir eine kleine Werbegebühr. Für Sie als Leser erhöht sich dadurch nicht der Preis, Sie unterstützen aber unser kleines Unternehmen.
BERNINA 880 Review (2025 Update)
Anmerkung des Herausgebers: Dieser Testbericht zur BERNINA 880 wurde ursprünglich im Jahr 2015 verfasst und im Jahr 2023 überarbeitet und aktualisiert. Wir haben Alternativen hinzugefügt wie Janome Horizont Memory Craft 9850, Brother Inno-vis NQ1700E, Und Janome Memory Craft 500E.
Ein Website-Besucher bat um eine Bewertung des Bernina 880. Ich freue mich, sagen zu können, dass ich bei einem Besuch bei Once Upon a Quilt in Ft. Lauderdale, ich konnte diesem Wunsch nachkommen. Erst als ich diese Rezension schrieb, wurde mir klar, wie ähnlich der 880 dem ist BERNINA 830.
Es gibt jedoch einige sehr deutliche Unterschiede zwischen den beiden Maschinen. Mehr dazu, wenn wir unten die losen Enden abbinden.
BERNINA 880 Übersicht
Die BERNINA 880 ist eine High-End-Näh- und Stickmaschine, die für professionelle und fortgeschrittene Heimnäher entwickelt wurde. Sie verfügt über einen großen 12-Zoll-Nähbereich, der ausreichend Platz zum Quilten und Nähen großer Projekte bietet, sowie eine maximale Nähgeschwindigkeit von 1.200 Stichen pro Minute. Die Maschine verfügt außerdem über ein Farb-Touchscreen-Display, mit dem Benutzer Sticheinstellungen einfach auswählen und anpassen können, sowie über ein integriertes Sticksystem, das präzise und detaillierte Stickdesigns liefert. Zu den weiteren wichtigen Merkmalen der BERNINA 880 gehören ein Dual-Feed-System, das für einen gleichmäßigen und gleichmäßigen Stofftransport sorgt, eine große Stickfläche von bis zu 15,7 x 5,9 Zoll und ein automatischer Fadenabschneider, der Zeit und Mühe spart. Darüber hinaus verfügt die Maschine über eine große Auswahl an Nähfüßen und Zubehör, darunter ein Freihandsystem, mit dem Benutzer den Nähfuß einfach anheben und absenken können. Insgesamt ist die BERNINA 880 eine Näh- und Stickmaschine der Spitzenklasse, die fortschrittliche Funktionen, präzises Nähen und zuverlässige Leistung bietet und sie zu einer ausgezeichneten Wahl für professionelle Näher und fortgeschrittene Heimanwender macht.
Der BERNINA An der von mir getesteten Maschine Nr. 880 war die optionale Stickeinheit angebracht. Es gibt einen großen 7-Zoll-Vollfarb-Touchscreen sowie eine Reihe von Funktionstasten über der Nadel, die die folgenden Funktionen steuern: Start/Stopp; Nadel hoch/runter; Faden abbinden und abschneiden; Design-Start/Stopp; Rückwärtsstich; Nähfuß oben/unten und eine Automatik Nadeleinfädler.
Mithilfe der durchsichtigen Spulenabdeckung und der Fadensensoren können Sie sicherstellen, dass genügend Faden auf der Spule ist, bevor Sie mit einem Stickmuster oder einer komplizierten Nähaufgabe beginnen.
Die BERNINA 880 wird von 30 hellen LED-Leuchten beleuchtet und verfügt über einen variablen Geschwindigkeitsregler, eine automatische Spannungseinstellung und eine automatische Untertransportfunktion, die den Transporteur abhängig von den ausgewählten Stichoptionen und Maschineneinstellungen anhebt und absenkt.
Auf der rechten Seite der Maschine, unterhalb des Handrads, befinden sich zwei USB-Anschlüsse, ein Kopfhöreranschluss und ein Anschluss zum Anschließen eines Monitors, der eine Computeranbindung und das einfache Herunterladen von Updates und zusätzlichen Stickmustern ermöglicht.
Die Stichplatte verfügt über Nahtführungen auf der linken und rechten Seite der Nadel sowie diagonale Führungen, um eine Vielzahl kreativer Näh- und Patchwork-Aufgaben zu erleichtern.
Welche Alternativen gibt es zur BERNINA 880?
Bei der BERNINA 880 handelt es sich um eine Industriemaschine Nähmaschine das kostet ziemlich viel Geld. Hier sind einige Alternativen, die wir ebenfalls empfehlen.
Are you searching for a compact-size embroidery machine? Then, with Janome Horizon Memory Craft 850, your hunt just ended. The machine can impress you with its versatility and abundance of great features. It consists of sewing and embroidery modes, allowing you to easily switch between the skills. Moreover, the machine provides you with up to 200x 280mm hoop capabilities to ensure precision, especially during embroidery, and the latest needle threading system lets you do some vibrant stitching.
- A wide array of more than 200 built-in stitches
- 175 embroidery designs
- Sturdy frame to manage hard fabrics
- Editing capabilities
- Prompt touchscreen for easier navigation
- Expensive, especially for beginners
- Slow speed of embroidery
Dieses Modell von Brother ist ein funktionsreiches kommerzielles Gerät, das Ihnen neben den an Bord verfügbaren Optionen auch Zugriff auf über 5000 optionale Designoptionen von iBroidery.con bietet. Es verfügt außerdem über einen integrierten Speicher zum Speichern Ihrer Muster und Designs. Für den visuellen Komfort wurden zwei LED-Leuchten sowie ein fortschrittlicher Nadeleinfädelmechanismus und eine automatische Fadenspannung eingebaut, um eine angemessene Präzision zu gewährleisten. Die meisten Funktionen des thailändischen Modells sind automatisch und werden nach den Wünschen des Benutzers eingerichtet. Die Qualität der Lieferung ist ausgezeichnet und reibungslos und das Gerät arbeitet unglaublich schnell, wodurch Sie viel Zeit sparen. Für größere Näh- und Stickprojekte steht ein großer Arbeitsbereich zur Verfügung. Auch der Arbeitsbereich ist mit LED-Leuchten gut ausgeleuchtet.
Mit dem Janome Memory Craft 500E können Designer ihren einzigartigen Stil durch personalisierte, verzierte und mit Monogrammen versehene Kreationen zum Ausdruck bringen. Seine intuitiven Funktionen, darunter ein Vollfarb-Touchscreen und Bearbeitungsfunktionen auf dem Bildschirm, bieten beispiellosen Komfort. Mit einer maximalen Stickgröße von 7,9 x 11 Zoll und 160 integrierten Designs eignet sich diese Maschine für komplizierte Projekte. Der automatische Fadenabschneider, der fortschrittliche Nadeleinfädler und die USB-Importfunktion steigern die Effizienz. Dank des lebendigen und benutzerfreundlichen LCD-Farb-Touchscreens ist die Navigation durch die erweiterten Funktionen nahtlos und macht den MC500E zu einem vielseitigen und inspirierenden Werkzeug für kreative Unternehmungen.
- Ermöglicht Designern personalisierte, verzierte und mit Monogrammen versehene Kreationen
- Vollfarbiger Touchscreen und Bearbeitungsfunktionen auf dem Bildschirm für unvergleichlichen Komfort.
- Die maximale Größe von 7,9" x 11" eignet sich für komplizierte Projekte
- Einige Benutzer, insbesondere Anfänger, könnten die erweiterten Funktionen als etwas überwältigend empfinden
Welche Funktionen bietet die BERNINA 880?
- Insgesamt 1764 Stichoptionen
- 400 Stickmotive
- 12 alphanumerische Schriftarten
- 20 Knopflöcher
- 40 Nutzstiche
- Näht bis zu 1200 Stiche pro Minute
- Stickgeschwindigkeit bis zu 1000 Stiche pro Minute
- Stichspeicher
- Vollfarb-Touchscreen
- Großer abnehmbarer Ausziehtisch
- Extragroße Spulen
- Freier Arm
- Doppeleinzug
- Bildschirmanimationen und Tutorials
- Automatischer Nadeleinfädler
- Rückwärtsstich
- Formdesigner
- Stichdesigner
- Stichverzerrung
- Farbkreis
- Spiegelbild
Arbeiten an der BERNINA 880
Was mir an den BERNINA 5er-, 7er- und 8er-Serien besonders gefällt, ist, dass alle Maschinen das gleiche Gewinde haben. Auch die Spulenwickelmechanismen und -verfahren sind identisch.
Diese Ähnlichkeit macht es äußerst einfach, problemlos von einer Maschine zur anderen zu wechseln. Die Schritte zum Spulen und Einfädeln sind nicht nur identisch, die leicht verständlichen integrierten Einfädelhilfen machen jede dieser Näh-, Quilt- und Stickmaschinen noch einfacher für den Einsatz einzurichten.
Nach dem Einfädeln ist die Auswahl der gewünschten Sticheinstellung ganz einfach und benutzerfreundlich. Die Herausforderung besteht darin, zu entscheiden, welche der mehr als 1700 Stichoptionen und 400 integrierten Stickdesigns Sie auswählen möchten.
Im Gegensatz zu den meisten anderen Rezensionen habe ich beschlossen, mir die Zeit zu nehmen, ein Stickdesign auszuprobieren, anstatt eine Reihe von Nutz- und Zierstichoptionen auszuprobieren.
Nachdem das Design ausgewählt wurde, verwandelte sich der Touchscreen in eine Doppelanzeige, die links das Stickdesign sowie ein Raster mit den Größendetails des ausgewählten Designs anzeigte.
Mit dieser Funktion kann der Benutzer das Design vergrößern oder verkleinern, um es an seine spezifischen Anforderungen für die jeweilige Aufgabe anzupassen. Ich habe mich für die Standardgrößeneinstellung entschieden. Jetzt musste nur noch sichergestellt werden, dass die richtige Garnfarbe eingelegt war, und die Start-/Stopp-Taste gedrückt werden.
Die BERNINA 880 ist schneller als praktisch jede andere Heimstickmaschine, die ich bisher gesehen oder getestet habe. Außerdem ist es relativ leise und hat fast keine Vibrationen.
Für eine so schnelle Maschine ist das ein klares Plus. Normalerweise weisen Maschinen, die mit einer Geschwindigkeit von bis zu 1000 Stickstichen pro Minute nähen, auch deutlich mehr Vibrationen auf als diese.
Das mit der BERNINA 880 erstellte Stickmuster wurde perfekt umgesetzt. Wenn ein Fadenwechsel erforderlich ist, stoppt die Maschine und gibt einen Signalton ab, der Sie darüber informiert, dass Ihre Aufmerksamkeit erforderlich ist.
Der integrierte Mehrfachfadenständer ermöglicht einen schnellen und effizienten Fadenwechsel. Die integrierten Fadenführer sind äußerst hilfreich, um den Fadenwechsel schnell und fehlerfrei zu gestalten. Jeder Stich ist präzise und wohlgeformt. Das Endprodukt war in jeder Hinsicht einwandfrei.
Welche Stoffe eignen sich für die BERNINA 880?
| Stoffe, die funktionieren | Stoffe, die nicht funktionieren |
|---|---|
| Naturfasern/Baumwolle-Leinen-Wolle Feine Stoffe/Seide-Satin-Taft/Samt Synthetische Stoffe/Mischungen aus Viskose und Polyester Strick (nur mittelschwer bis schwer) Denim Extra dicke Stoffe oder mehrere Lagen | Leder und Wildleder Fell Reptilienhaut Canvas/Twill Kunststoff/Gummi |
Welches Zubehör ist im Lieferumfang der BERNINA 880 enthalten?
Standardzubehör:
- Anstecken Nähfüße
- Standard
- Knopfloch
- Knopfloch mit Schieber
- Overlock
- Unsichtbare Naht
- Reißverschluss
- Taste
- Offene Stickerei
- Seitwärtsbewegung
- Patchwork
- Langer Schaftadapter
- Knieheben
- Schraubendreher
- Fusselbürste
- Zusätzliche Spulen
- Extra Nadeln
- Bedienungsanleitung
- BSR – BERNINA Stichregulator
- Zusätzliche Spulen
- 3 Stickrahmen (1 klein/1 mittel/1 groß)
- Extragroßer Ausziehtisch
- Staubschutzhaube
- Lehr-DVD
- 360°-Richtungsnähen
Optionales Zubehör:
- Set mit aufsteckbaren Nähfüßen
- Jeansfuß
- Maßgeschneiderter Heftfuß
- Stopffuß
- Frei beweglicher Liegefuß
- Ösenstickfuß
- Kantenstichfuß
- Sperriger Overlockfuß
- Cordonnet-Fuß
- Reißverschlussfuß mit Führung
- Fuß sammeln
- Flechtfuß
- 2 Kordelfüße (3 Rillen/5 Rillen)
- Freihandstickfuß
- Applikationsfuß
- Quiltfuß
- 4 Biesenfüße (3, 5, 7 und 9 Rillen)
- Paspelfuß
- Unsichtbarer Reißverschlussfuß
- 3 Sohle gehender Fuß
- Patchworkfuß
- Doppelter Kordelfuß
- Zickzack-Säumerfuß
- Fuß mit Rollsaum
- Rüsche
- Binderfuß
- Eine Auswahl antihaftbeschichteter und transparenter Nähfüße ist ebenfalls erhältlich
- Lederroller (hilft bei der Arbeit mit klebrigen Stoffen)
- 2 Mehrfachspulenhalter (3 Spulen oder 15 Spulen)
- Fadenführung für den frei beweglichen Couchtischfuß
- Kreisförmiger Stickaufsatz
- Nahtführungen
- Auf Freiarmtisch schieben
- Patchwork
- Mit Skala
- Linke oder rechte Hand
- Knopflochschneider mit Holzblock
- Cutwork-Nadeln
- Kristallstanzer
- Stift
- Stickeinheit
- Biesenbefestigung
- Cutwork-Vorlage
- Geradstich-Stichplatte
- 9 mm Stichplatte
- Stickrahmen
- Hoop 'n Buddy-z
- Mega-Hoop
- Jumbo-Reifen
- Kurzschaftadapter
Wie pflegt man die BERNINA 880?
| Wartungstätigkeiten | Nach jedem Gebrauch | Monatlich | Einmal im Jahr | Wie benötigt |
|---|---|---|---|---|
| Rennhaken und Futterhunde reinigen | Ja | NEIN | NEIN | NEIN |
| Wischen Sie den Kopf mit einem weichen, trockenen Tuch ab | NEIN | NEIN | NEIN | Ja |
| Wischen Sie den Kopf mit einem weichen, feuchten Tuch ab | NEIN | NEIN | NEIN | Ja |
| Schmieren | NEIN | NEIN | NEIN | NEIN |
| Service durch einen Nähmaschinen-Reparaturprofi | NEIN | NEIN | Ja | NEIN |
BERNINA 880 Zusammenfassung
Die BERNINA 880 ist eine ideale Ergänzung für jedes Nähzimmer, in dem das Heimsticken im Mittelpunkt steht. Diese Maschine ist schnell, präzise und leise.
Meiner Meinung nach ist es keine gute Wahl für jemanden, der sich nur sporadisch oder gelegentlich mit der Maschinenstickerei zu Hause beschäftigt, aber eine definitive Bereicherung für den echten Maschinenstick-Enthusiasten.
Gegenüber der BERNINA 830 bietet die 880 folgende Vorteile:
| Besonderheit | 880 | 830 |
|---|---|---|
| Gesamtzahl der On-Board-Stiche | 1764 | 1430 |
| Integrierte Nutzstiche | 40 | 32 |
| Knopflöcher an Bord | 20 | 10 |
| Stickmotive an Bord | 400 | 150 |
| Integrierte alphanumerische Schriftarten zum Nähen | 11 | 11 |
| Integrierte alphanumerische Schriftarten für Stickereien | 12 | 10 |
| Maximale Nähgeschwindigkeit | 1200 | 1100 |
| Maximale Stickgeschwindigkeit | 1000 | 1000 |
| Stichverzerrung | Ja | NEIN |
| Stichdesigner | Ja | NEIN |
Die BERNINA 880 gibt es tatsächlich in zwei verschiedenen Modellen: der 880, die ich getestet habe, und der 880 Silver Edition, die weitgehend identisch mit der 880 ist, aber mit vielen Standardzubehörteilen ausgestattet ist, die hier als optional aufgeführt sind.
Die Entscheidung, ob man sich für die Standardversion 880 oder die 880 Silver Edition entscheidet, liegt ganz beim Verbraucher und seinen besonderen Näh- und Stickvorlieben.
Egal, ob Sie sich für die Standardversion des 880 oder die Silver-Edition entscheiden, Sie werden mit Ihrer Wahl zufrieden sein. Ich empfehle jedem, der sich für eine dieser Maschinen interessiert, dringend, seinen örtlichen BERNINA-Händler aufzusuchen und um eine Vorführung zu bitten.
Das Verkaufsteam nimmt sich gerne die Zeit, Ihnen die BERNINA 880 und ihre Leistungsfähigkeit zu zeigen. Darüber hinaus profitiert jeder Käufer einer BERNINA 880 oder 880 Silver von kostenlosen Kursen, in denen er Schritt für Schritt den Umgang mit allen Funktionen und dem Zubehör erlernt.
Ich konnte an diesem Gerät überhaupt nichts auszusetzen finden, vielleicht mit Ausnahme der Tatsache, dass der Preis für viele Haushaltsbudgets außerhalb des Rahmens liegt. Der vom Hersteller empfohlene Verkaufspreis (UVP) ist etwas hoch, aber dieses Gerät ist nicht so teuer wie einige der anderen Geräte seiner Klasse, die ich getestet habe.
Die wirklich gute Nachricht ist, dass der UVP genau das ist … der EMPFOHLENE Verkaufspreis. Jeder BERNINA-Händler ist berechtigt, den endgültigen Verkaufspreis und die Einzelheiten des Vertrags auszuhandeln, sodass praktisch jeder, der sich wirklich für den Erwerb einer dieser Näh- und Stickmaschinen interessiert, ein für ihn und sein individuelles Budget günstiges Angebot erhalten kann.
BERNINA 880 Testbericht
Zusammenfassung
The BERNINA 880 is a computerized sewing and embroidery machine that is designed for both beginners and experienced sewers. It has 1,764 built-in stitches, including basic utility stitches, decorative stitches, and quilting stitches. The machine also has a number of features that make it easy to use, such as a needle threader, a top-loading bobbin, a free arm, and a large LCD touchscreen. The BERNINA 880 also has a built-in embroidery module, which allows you to embroider a variety of designs.
Overall, the BERNINA 880 is a high-end sewing and embroidery machine that is designed for both beginners and experienced sewers. It is a good option for those who are looking for a machine with a lot of features and that is easy to use.
Empfohlene Beiträge
Wenn Sie ein fortgeschrittener Näher sind, schauen Sie sich unsere an beste Nähmaschinen, beste Nähbücher Und beste Nähzeitschriften Beiträge und wenn Sie auf der Suche nach einem sind mechanisch, Schwerlast, Quilten oder IndustrienähmaschineSchauen Sie sich einige unserer tollen Artikel an. Wenn Sie ein Nähanfänger sind, sehen Sie sich unsere an Die besten Nähbücher für Anfänger, beste Nähmaschinen für Anfänger Und beste Nähmaschinen unter $200 um loszulegen.
Für markenbezogene Artikel klicken Sie hier Beste Bernette | Bestes Bernina | Bestes Brother | Beste Husqvarna Viking | Bestes Janome | Bestes Juki | Bestes Singer |
Das beste Zubehör finden Sie hier Beste Stühle | Beste Tische | Bestes Transparentpapier | Beste Maschinenöle | Beste Scheren und Scheren | Beste Nähfüße | Beste Nadeln | Beste Nähsets |
Viel Spaß beim Nähen.
Thank you so much for your review. I have looked at this machine and thought the saleswomen told me that the 880 threaded differently them all the other Bernina? ?
I have the 880 and also the 830 and there are a few differences. They do thread the same. The 880 has a updated screen and you can do stitch manipulation and program am the pedal. Beyond that I haven’t noticed any difference beyond the kinks are worked out from the 830.
It does thread differently. You MUST hear the click when threading the top to the needle. There are lots of variables with this machine.
I have finally gotten my 880 in great shape. The problem was the bobbin door sensor. There was a recall on them and my dealer didn’t adhere to it. Finally ……. the sensor was replaced and it runs like a clock now.
I had just purchased a replacement when I learned of this fix. Now I am selling the machine, for a good price. Too bad, but it is what it is. I just don’t want to have to deal with this dealer anymore. All of the presser feet are included plus lots of other add ons. If any one is interested, let me know.
I live at Saint Augustine Fl.
It has a different auto threader that really is good if they work. I have an old 830LE and mine works great. I did find a manufacturing fault in the threader after I had it in the shop to repair it. I took a picture of the threader at close range and then zoomed it in and I found a spring installed wrong. It held the little centering device to one side and about 90 percent of the time, it wouldnt thread. Now it threads about 100 percent. I bought it used with very low times on it. It was bought new and traded back in for a lower model. The mention of the see through bobbin window in the extension table is really nothing to brag about. The Bobbin is completely out of site. The bobbin thread can’t even be seen when the door is opened until I push the little bobbin release and look at it. The 830, and I assume the 880 has a complete different bobbin compartment. When the door is opened, the bobbin Turns over 180 degrees and comes out to you. When you close the door, the bobbin turns over 180 degrees to the inside and is out of site. none of the other Berninas do this that I am aware of. It is 6;00 AM my time and I was on my machine at 3:30. I love it, but it does have a high learning curve, especially for an old man who never sewed anything before. Don’t give up on learning it.
I am considering an 880 but was told that it was not compatible with a Mac operating system, that you needed windows to run additional software.
I’m not aware of that, but the only thing I worked with was adding designs to be used. That was easy as pie. Use a stick to download your designs, then stick it in the slot of the machine. They say it is progress
Do you still have the 880le for sale?
I don’t know about that. Perhaps go to bernina website to check it out.
Sorry to say that my 880 has to have a very bad grade….as does the dealer. My 880 is 1.5 years old and has been in the shop more than out. Always told nothing wrong with it. It died three weeks ago, went to Bernina heaven, also known as Chicago. Haven’t heard a word on it. People with 830s are fed up as well.
Update on 880. After having the machine in for repair 5 times in 1 year, they sent it to BERNINA, because it just died. Previously I had been told there was nothing wrong with it. It came back two days ago, from BERNINA. The problem was a bad CPU board, and a nicked CPU tape. It now embroiders like a dream and sews beautifully. Fingers crossed that it stays this way. The dealer, Paula’s Fabrics, at Jacksonville, Fl charged me 330.00 for shipping and labor, because she said it was over a year old. Unbelievable, but true. After being in her shop 5 times for the same problem, and I even asked her to send it back after the 4th service visit. On my way out the door she scolded me because she had had to pay the tech for all of the visits my machine had made. Speechless!
Hallo Mary -
Vielen Dank für Ihren Besuch bei Sewing Insight.
I am in complete agreement with you. The tech at the Jacksonville store should have been able to recognize the issue with the CPU board and tape on the first visit. If you are unable to recoup your losses from the dealer, why not express your concerns to Bernina USA directly. While some manufacturers might not care about customer satisfaction, I know for a fact that Bernina takes customer service very seriously. You can send an e-mail directly to the manufacturer by following this link. https://berninaofamerica.zendesk.com/hc/en-us/requests/new?ticket_form_id=19940
Viel Spaß beim Nähen.
No use In complaining to Bernina. If their dealers sell enough product they can do NO wrong. I’ve been there with 2 Berninas. They do not care about the customer…money is their top priority!
I woud not use that dealer if at all possible. That is so uncalled for, plus she should have sent your machine to Berinina way before she did.
You pay for the warrantee when you buy the machine. It seems like she waited until the year was up to save herself money. Meanwhile you have a lot of headaches. Hopefully that is over now that Bernina resolved the problems.
Are you still happy with your machine after repair please let me know
I too have had more problems with my 880, than any other machine. I am an experienced seamstress, with 30+ years of heavy use. In less than a year, my 880 had been in the shop for major repairs 5 times. I have barely had a chance to use it. Now it is off to Chicago. Very frustrating. I have not even attempted any embroidery yet…all issues are with standard sewing. I give this machine a definite thumbs down.
I am totally with you on that 880. I’m thinking babylock. But not at Paulas Fabrics at Jacksonville.
I’m just really afraid to buy any other sewing machine. I don’t think anything is made well in today’s world no matter what it is. After about $17,00.00 in cost of machine, repairs and extra feet I can’t possibly buy anything. I have seen all my life and now I’m so frustrated. If I sell everything I will just give sewing up which I can’t believe after so many years of sewing. I feel sad instead of the excitement I use to have.
Do you still have your 880? I am so frustrated I would like to sell all of my bernina things. I just bought a 560 to use because mine was gone for so long. Not even one month old and the bobbin sensor comes on causing the machine to stop sewing. Got my 880 back this week with a hefty bill of nearly $500.00 charge .
I don’t know if all machines are like this today or not. I have sewn all my life and never had to have a repair on my machine.
I can empathize with your complaints and concerns. I was a Bernina devotee until I bought the 880, with great expectations for a terrific machine, although terribly expense.
I was also completely dissatisfied with the dealer, Bernina customer service, and the machine. It is difficult to get beyond so many problems with the threading and bobbin seizing up, that you cannot begin to enjoy the machine.
I made the decision to trade in for a Baby Lock Destiny and it was one of the best decisions of my life. I love this new machine and the dealer that provides responsible and customer-focused service and free classes.
I am totally with you on that 880. I’m thinking babylock. But not at Paulas Fabrics at Jacksonville. Right now I have the same problem you had…..for the second time. This time I had the yellow screen telling me the machine failed. Duh! Like I hadn’t figured that out. I will never buy another Bernina, and definetly not from Paulas fabrics at Jacksonville.
This is what I learned about the bobbin sensor. There was a new program for the sensor. The factory sent the bad upgrade to the dealers. They then realized that they had done more harm than good using the dealers upgrade. They then learned that there was also an upgrade(fix) for the bobbin sensor for the machine owners. The dealers had to install the owners upgrade to the bad machines, and they now work like a ding dong.
In the months that all of this was going on, I bought a Destiny 2, and now use that. I still have the 880, and would like to sell it, but first I would like to spend some time getting acquainted with the destiny. Who knew sewing could be so complicated. The dealer that installed the new sensor program in my machine did a great job. I was totally shocked when I heard the whole story on the upgrade. It’s the dealers that are flubbing the service. Lazy and have their hands out for the almighty buck. I’m going to sell my 880 for 5000.00, which is a steal but it is what it is. I have everything in the world for that machine, will miss it……so, I hope everyone else whom had that problem can get it fixed and get on with our love of sewing. ❤️
I do still have my 880. After $200.00 more spent on it and a different dealer it works great! Has taken me 4 years of frustration and back and forth to dealers as well as Bernina in Auroa IL.
I think I might actually love my machine now.
Thanks for letting me know about an update available for the 560 bobbin sensor. Almost afraid to take it in. Don’t really care for the dealer where I purchased it and I’m not certain they have the knowledge to fix it.
I am so sick of my 880. The bobbin system has had issues 4 times since Thanksgiving. My dealer is 50 miles one way through Atlanta. Im so fed up
Follow up on Bernina dealer in Jacksonville, Florida… I have a friend who lives there and will drive all the way across the state to get her Bernina serviced before she will take it to Paula’s Fine Fabrics. The store does not have a good reputation when it comes to service. I would definitely contact Bernina USA. I really don’t know how she has stayed in business this long.
I am extremely satisfied with my local Bernina dealer In Lake Mary FL. Service is top notch and if they can’t fix it, it goes to Chicago. The drive from Jacksonville would not be wasted….and they have beautiful fabics and knowledgeable staff. Always on the cutting edge (lol) of new stuff and designs. Bernina Sewing Center
Thank you for your message. I thought it was just me. She is meaner than a snake, when you take a machine in to be fixed. I don’t know how bernina keeps her.
Thanks for that bit of information. I was beginning to think it was just me.
Mary Jo Mark, are you still looking to sell your 880? I’d like to buy a Bernina but our local dealer’s prices are out of my league so I’m looking at used ones. I’m in Tampa.
My 880 has also spent almost more time at the dealer than at my home. Most recent was it just would not turn on. After 3 weeks at the dealer, it got a new circuit board. This machine has been very frustrating for me.
I have a Bernina 880. Had problem with a rough spot inside that the dealer was going to put electro magnetic tape on it. Not acceptable. Insisted on new machine. Four months with new machine, needed new circuit board. Got it home and only the light will turn on. Feel like I have spent a huge amount of money for a night light. Waiting to hear back from the dealer. Very frustrated!!!
I have had nothing but problems with my 880 I got it in December 2015 it’s now April 2016 and it’s in the shop as usual things fall out break off it jams you want to for your finger it freezes and you can’t turn the needle out to get that out of your finger unbelievably dangerous machine and I can’t tell you how many things of gone with screws just fall out Thread doesn’t go in the uptake lever The people who sold it to me act like I’m doing something wrong to the machine and I’m not They keep telling me I can only use one kind of thread and the bobbin system is completely useless I ruined several projects and destroyed many quilts with Loopy threads all over the back when it looks fine on the front My patience is about at an end
This is getting worse and worse. How can they keep selling these machines when they know there are huge problems.
I am a Bernina customer at the Lake Mary, FL store. I couldn’t agree more with Pam LF. They do an outstanding job. Lessons on how to use and maintain your machine are also FREE with any machine you buy there. Help is always available with any problems you encounter. Definately worth the trip if your machine has problems and you want it fixed properly.
I have a 830 LE that has never worked well for more than a couple of days of sewing. It’s in the shop a lot. My Bernina dealer in Winston-Salem, NC is concerned about her bottom line; the advertised superior service is there if you can haul the heavy beast to the dealer and pay outrageous $ for parts & repairs every other month. I love the machine’s features but it is too buggy for me to recommend to anyone. Bernina should be embarrassed by the 830! Currently I have a blown circuit board; if I buy it & install it myself it will be Andre $400
I own a 830LE. Second one for me. The first was REALLY broken right out of the box. Second one, replaced by dealer, has worked beautifully. Dealer in SLC UT is stellar. Rhonda will stand by her customers. Second dealer, in La Plata, is awesome as well. They know the machines! Shopping for a good dealer is first step. There are two dealers in neighboring area that everyone seems to have problems with. For machines like these, I recommend NOT taking it right home, but open at store, and sew on it, for a few hours. Some have major problems, some have minor problems. If the computer has any issues, the machine has major problems. That first machine went back to Switzerland for repairs. But once you get it working, this sews beautifully. And in a class full of other brands, I get a lot of questions about this machine once the other brand owners see it running. It is quiet, fast, stitches superbly, and has the biggest hoop they have ever seen. But, once it is all working, don’t leave it plugged in when not in use and put it on a powerful surge protector device when it is in use. It is a computer first and foremost. I have been both the frustrated unhappy owner and the thrilled owner who can’t wait to sew on it. Shop the dealer first, then make them spend time with you if you are having problems.
How does one justify spending $14,000 on a sewing machine? I have been in the home dec business for many years, love to sew, craft constantly. I would love to own the Bernina 880 but just cannot understand how to justify the cost.
Well, be careful with the 880……it has a whole slew of problems. Mine is in the shop now….fly wheel frozen and sewing is impossible.
Thanks so much for sharing your experience. I have wanted this machine, but I think I will hang onto my Artista 730 E. It still works well. Also, I LOVE my old Bernina (it’s a 1010). The old 1000 series machines have beautiful tension.
I have been a huge fan of Bernina machines until now. I have had my 880 for almost 2 years and wish I wouldn’t have purchased it. I have had in the repair shop several times and the dealer gets frustrated every time I call about issues. Parts have already been replaced and broken inside. I would not recommend this machine to anyone. I even take all the extra care, cleaning, and daily maintenance this machine requires. Save your money and frustration!!!
I have never owned a bernina sewing machine. I thought I would buy one because that’s all I ever heard anyone talk about. You just had to sew on a bernina, nothing like it. Well I bought one the 880 I wanted it all. Well mine was in the shop in 6 months time and the part part broken was not covered under warranty. It’s been over a year and the tension was off. The trip cost me $150.00. Then they called and said my needle threaded didn’t work. I told them I knew that and had told them that when I dropped it off. I was told it wasn’t part of the $150.00. That would be extra and they would have to keep it longer. The original owner of the shop knew she was going to close when she sold me the machine. Didn’t tell me. Now no one even wants to work on it. They say they didn’t make the commission. I really wish I had never seen this machine. I loose sleep over it. What do you do after spending that much money? So disappointed.
I purchased an 880 in August 2015. Except for a required bobbin assembly replacement (mine wouldn’t engage, 2 months after purchase), all has been fine. It’s very touchy, however. The computer wants to outsmart the seamstress. The “problem” with Bernina, is that they are on a constant quest to sell you more accessories, until you are too deeply invested to abandon their products. They do make a quality machine, however.
I bought a Bernina 880SE. So many of my friends have Berninas and love them. I have had BabyLock and loved the user friendly machine. I think I jumped into a boiling vat of oil when I purchased the Bernina. It is very heavy and to lug the machine to a 3 minute fix and back home is ridiculous. I have had it a year and have used it twice both times back to the dealer. I can not bring myself to use it again just thinking of having someone come to the house to move it to my car then to the dealer — so it sits. I should have got the Destiny which has so many more things I would use. This particular Bernina is not user friendly. The bobbin threading gets me … use a dental tool to see if threaded properly when I can not even see what I’m looking for. I am embarrassed and feel so dumb that I cannot use this machine.
One thing that no one tells you unless by accident…..when you are threading the needle, hold the thread taught the whole way thru the process. You have to hear a click that the disks have gotten the thread. Otherwise, it would be like walking on slippery ice….no traction at all. Hold at thread beginning with hand at the spool, and hang on to the thread with the other hand till you get to the needle.
One thing that no one tells you unless by accident…..when you are threading the needle, hold the thread taught the whole way thru the process. You have to hear a click that the disks have gotten the thread. Otherwise, it would be like walking on slippery ice….no traction at all. Hold at thread beginning with hand at the spool, and hang on to the thread with the other hand till you get to the needle. Then, as far as setting the bobbin, you have to be sure that when you grab the thread you take it to the left, with your right hand, and click it into the spring at that left side. Once it is in that loop, bring it to the right. It has to be set securely.
I bought my 880 almost 3 years ago. It was the second one sold by the dealer. It has sewn over 5 million stitches. I have never a serious issue with it. It sews beautifully. I have never paid for a repair. I love this machine and am very pleased with my purchase. I have been lucky to have had two very good technicians work on my machine. (I moved last year) These machines require an experienced, well trained technician. The dealer is important, but I think the technician more so. Before I moved, I talked to my dealer/technician about the dealer in my new location. He assured me that I would get good service and I have. I
Lucky you! Enjoy and happy sewing.
I would like to hear from anyone who has used the 880 BSR on a quilt frame (doing machine quilting), how has the 880 performed?? I have an 820 and it is a wonderful machine on the sewing table. I also bought the Bernina quilt frame and have found the 820, using BSR, has a nasty habit of skipping stitches going in certain directions. I have been through many conversations about tension, thread, needles, speed, batting…..nothing fixes the problem and I believe even Bernina isn’t trying to hide this problem on the 820. So did they get it right this time with the 880? I’d love a response.
No! They did not get it right. Read all if the comments…..no one including self is happy with that 880. Stay away from it like it is the plague.
I am very happy with my 880. I purchased mine before they started shipping so I have had it for a long time. It has been almost two years since I have taken it in for maintenance and I think I have taken it in 4 times. Two right after I got it and then 2 more in the last 3 years and they were for annual maintenance. I will be taking it next week because I need the latest update. You must have a good dealer and experienced technician. If I wasn’t a Bernina girl, I would look at the top of the line Brother. But since I have 4 Bernina’s and love all of them, I will stay with them.
NO! My 880 has been to the factory 3 times, continues to not sew…..it’s in the shop now. Been on the table and not working for 7 mos. it just never ends! I am of the mind that they are using trashed pieces in the machine.
I’m sorry to say mine was also in the shop for repair constantly. Went back to the headquarters in Aurora 4 times. I finally just traded it and that was scary because I didn’t even
Know if I wanted another BERNINA or not. I lost most of my money I paid for the machine. I could not recommend the 880 to anyone. Some people love them. Makes me wonder how theirs can be so different. I was told I didn’t know how to work mine. I’ve been sewing for 50 plus years.
It’s great to hear good news on the 880. So happy for you.
I have finally found a great Bernina tech., whom also owns the dealership that she works in. Sadly, I found this great gal right after I bought the destiny 2. Never the less, I love the destiny and hope to find a like minded sewer that would like to buy this revitalized 880. It’s all in the tech! Can only say now,, that when you buy a new sewing machine, be sure the person selling it and working on it, is very good at what they do. My problem has been a very lazy dealer whom whines a lot.
Here it is 2018, July. Machine is back on the bench. Makes me grind my teeth!
I too purchased a Bernina 880 when they first came out. I was working full-time and didn’t sew all that much, I’m a quilter, but I’ve been sewing since I was a teenager (now age 79). I would go months without sewing anything. Then, when I had a deadline to make something on it, it wouldn’t sew. It’s been in the shop numerous times, a couple hundred dollars cost every time for service. I just got it back from the latest forey into the shop; sewed a 6 1/2″ block with zig-zag stitches. Then I discovered the automatic stitch width knob didn’t work and had to manually adjust the width of the zig-zag stitches. Now I’ve tried to sew two 12 1/2″ straight-stitched blocks, and the tension is all messed up. So, I don’t know how or why that happened. Previously I was having trouble with the machine refusing to sew because the bobbin was a problem or the top thread was a problem and it refused to sew anything. I want to get rid of this machine. I’ve never had these kinds of problems with any other machine I’ve ever owned (Singers, old non-computerized Bernina, Janome, etc), and I’ve owned a lot of them.
Love your site.
Greetings all. While doing my due diligence on a prospective purchase I found these coments. Is the Bernini 880 really that troublesome?
My alternatives are the Janome Horizon 15000 or the Destiny 2.
So far the Destiny 2 has escaped harsh criticism.
I really thought that the 880 was a winner.
Anyone had problems with the green button flashing telling you ready to go but won’t for? Sent a video to Bernina USA to make sure I wasn’t doing anything wrong
This is the 830 model.
Just left my Bernina dealer. Was thinking about trading my 830 for a 880. Thanks for the reviews and helping me make up my mind. I certainly don’t want to throw more money away on another headache!
I live in the uk and have a 820 and a 830. I don’t know your problems with Bernina in US but service in the UK is excellent. They picked my machines up wednesday serviced them and replaced any bits and did updates on a they were returned the following Wednesday. The service was 150 miles from my home. Cost £210 each. Included all carriage and taxes. Minor fault reported picked up again on Monday and returned Thursday free of charge. That is good service.
I have a Bernina 880 plus that i purchased in February. One thing that i experienced to be concerning, is that the machine is very noisy at higher speeds. I am always afraid something might break. I have been embroidering for many years, but this is by far one of the noisier machines i have used. Tension on the sewing side is very often an issue, as the machine is not fond of lighter fabrics. I have tried to use the sewing advisor that sets the tension and other setting for specific fabrics. Not a plan at all. As soon as you select one of the lighter fabrics, the machine tangles the thread and pulls the fabrjc into the needle plate. So i have resorted to just ommiting that “feature”. The sideways motion stitches are never the same, not even in the same row of stitching. I have the bernina artista 200 that has been upgraded to the 730,and it stitches FAR beter than my 880 plus. On the embroidery side, in the smaller hoops, the machine stitches very well. Very good stitch quality. But in the bigger hoops like the maxi and jumbo hoop, the stiching becomes very inacurate and sloppy at higher speeds. The machine has fantastic sewing features if they would work properly, and is definately a sewing and embroidery computer. From the many reviews that i have read, it does not really seem that Bernina is doing much to solve problems on a more permanent basis. In South Africa we as the people are treated as the problem. In my opinion i will never buy or recommend anyone buying a Bernina. Sewing is supposed to be fun, fulfilling and pleasureable. Well let me just stop there. I will say though, i love my Janome MC12000 and i would not trade it for anything in the world! It is super quiet, efficient, stiches perfectly even at top speed, and has no problem stitch anything from chiffon to vinyl and fur.
I have put together comments for nearly two hours here, giving you long and drawn out comments about my life (mostly). But I decided the details were not as important as the message, so I am trying to be more concise. It is not important to explain how I know these things, I just do.
1. I have had 4 Berninas, and I loved them. But then I purchased a JANOME! The JANOME has a top loading bobbin, and does not need oiling any time! You can get out any thread tangles, or nests just by loosely holding on to the fabric and jingling the hand wheel back and forth. It usually comes out in 30 seconds.
2. There are no schools to teach sewing machine repair. Probably because in the over all scheme of things most people are throwing out sewing machines and just replacing them, just like computers.
3. If you become an owner or a tech for a sewing machine brand, you must pay for any training you receive and it is usually held at a location hours away from you and you must pay for your transportation, etc, also. And this is NOT required. Is it any wonder your servicing isn’t done right.
4. Back about 25 years ago I worked in a business that where Singer machines were sold. They had only a 90 days warranty. Most people had to bring them back for repair before their 90 days was up (some the same day they bought them) but the machines had to be sent away for repair and they always came back after the 90 days were up, so the people ended up having to pay for their repair.
5. Sewing machine dealers are not required, or even offered, proper trainging for running a business. But they are required to put out money up front to get in their initial inventory of mahcines. This is not any differenet from cosmetic sales (like Mary Kay) or insurance sales (like State Farm).
Lastly, back in 2004 I was offered a Bernina dealership were they dictated the location, the hours, and the inventory, with the initial investment of $20,000.
At the same time JANOME contacted me. I was to put together my own plan, and the investment was $10,000.
My experience has been the exact opposite. I have an 880 manufactured in 2018 and I absolutely LOVE IT! I use the machine to sew clothing, leather, quilt tops, bags, embroidery, and FMQ. The selection of feet is amazing, to name just a few: I love the binding foot to bind my quilts (I’m busy and it’s worth every penny), the ruffle foot to make fast, adorable ruffles, and the BSR for FMQ. The only time it has been back to my dealer is for annual service. After taking classes for the machine offered by my dealer I have found it to be easy to use, easy to maintain, quiet (even during embroidery), strong, fast and dependable. Yes, tension must be adjusted for different fabrics and I have found my machine likes a different bobbin tension for embroidery vs. sewing. Also, if fluff settles around the 4 bobbin sensors they can’t do their job properly. This can lead to a bobbin error message and the bobbin case may not swing out when the door is opened. There is a remarkably simple solution to this … keep the sensors clear. I use a clean Tooltron Micro Applicator Brush to gently remove lint from the sensors every time I clean and oil the machine (i.e., with each bobbin refill). The only instances I have had to clear the sensors more often was when sewing with Annie’s Soft and Stable, when doing embroidery, or during FMQ.
The crew at my dealer, Quilt ‘N Sew Connection in Prescott Valley Arizona, is fantastic and the tech is amazing. I enthusiastically recommend the 880 to those who are at an intermediate or advanced sewing level and are comfortable with computers. I would buy this machine again in a heartbeat. For reference I’ve also owned and sewn on Kenmore, Singer, Janome, Brother and Juki machines. I’ll stick with Bernina.
Thanks for this informative review.
I have an 880 that has been into the same dealer since I purchased it. It just continues to come out worse than when it went in. I paid $640 in 2023, got it back and it was broken still… I then took it back in 2024 and just received it back and the bobbin doesn’t work properly, the cutter only cuts the lower bobbin thread and not the top thread, there was a piece of thread in the cutter that I personally had to remove. The bobbin sensor eyes were covered in black dirt/dust like substance… I had to use qtips and 99% alcohol to clean them. I know this machine has a bad rep, but also the dealer technicians are just horrible! How do I get a machine back after “repair” and this is what I end up with?? How is this “fixed”?
I am looking at dealing with a different dealer at this point as the tech’s clearly are just taking my money.
https://youtu.be/f4a-NpvReYc?si=BTwDB0AAENhEHUS_