Hoe een ritssluiting met de hand naaien?

If you do not have enough sewing experience, learning to sew zippers by hand might initially seem like a very difficult job. It is, however, much simpler than it appears. A hand stitched zipper is ideal for those who do not have the necessary tools or do not feel comfortable sewing a zipper on a sewing machine. Let’s quickly get into the process.

Prerequisites to sewing a zipper:

1. With the tooth center aligned with the seam, start by positioning the zipper face along the seam and pinning it in place. By using an uneven basting technique, let the zipper hang far below the seam line.

2. To manually stitch the zipper tape into position, always use a prick stitch. To increase your sense of control, backstitch just a little bit at the beginning and finish.

3. The stitching method varies a little depending on the sort of zipper:

• Use the hand picking technique when hand sewing a regular zipper
• Because the stitching won’t be noticeable on the right side, use a back stitch when hand sewing invisible zippers.

4. Hand sewing zipper materials:

• Button hook
• Stof
• Rits
• Schaar
• Draad
• Lengthy, pointed sewing needle

Hoe een ritssluiting met de hand naaien?

You can stitch a zipper by hand in a variety of ways, using straightforward or intricate techniques. You can learn how to sew a zipper by hand in the simplest manner using the below technique:

1. Place your fabric on a counter. Make certain that it is leveled.

2. Pick up the fabric’s two long ends at this point. Take hold of one edge while leaving the other free. You’ll need to move the fabric slightly to ensure you have a firm grip on the edge.

3. Take your thread and insert it into the needle’s opening. Afterward, proceed to thread the needle through the other opening in the needle. To make the thread accessible, pull it back.

4. Put the needle through the zipper’s center opening after turning it over. Lay the closures on the material. Ensure that they are looking in the same direction.

5. The free end of the thread should now be pulled so it is laying flat. Put it there, at the base of the zipper. You should check to see that it is located properly.

6. Sew the tip of the zipper now by flipping your needle over. Until the complete zipper is sewn, repeat this step.

7. You might want to return to the boundaries. Simply pull out any creases that may exist.

8. You should now turn the zipper so that the top is facing up. The zipper’s top should be sewn.

9. You should cut off the extra thread after sewing the top. Simply grab some shears and cut it off.

You’re done.

So, this was the easiest method to sew a zipper by hand.

To watch a good video on how to hand sew a zipper, watch this amazing video from Stephanie Rubletz.

Tips to follow while working with zipper

1. Utilize a long zipper
The zipper will overhang the material if it is too long for your undertaking. This enables you to sew in both edges of the zip while leaving it closed. As a result, sewing in the zip is much more stable because the zip handle does not get in the way and you are not concerned about accidentally sewing past the zipper foot.
Trim the excess zip to size and the seam allowance will ultimately cover the zipper’s raw edges.

2. Stitch from the same end on both sides
Always stitch the zipper from the same end on both sides. As a result, if there is any fabric creep, it will all move in the same direction, preventing any misaligned textiles from developing.

3. Putting the zipper in place
Prior to layering your fabrics, you can use a pin along the top edge to ensure that the fabrics remain in place as you place the zipper. The zip should always be inserted at a right angle to the cloth and held in place with one pin, typically placed near the top of the seam.
After a few stitches have held the zipper in place, you can remove the pin and sew the complete zip, readjusting the zipper tape as necessary.

4. Use a Zipper foot
The zipper foot that most naaimachines have makes the process of sewing zippers significantly simpler. To position the needle to the left or right on some sewing devices, you may need to move the foot. On some, you can move the marker around. Knowing how to use the zipper foot and which portion of the foot to align with the cloth for topstitching and a 1/4″ seam allowance are important skills to have. Read our detailed buying guide of presser feet here

Sewing articles you may like

---

Summary: How to hand sew a zipper

Although hand stitching zippers takes longer than sewing them on a sewing machine, it is known to be relatively easy. When you’re not happy with the length of the zipper, the hand stitching technique is most useful.
Once the teeth are cut and correctly closed, you can adjust the zipper length until it is the right length for the garment, and the bottom can be hand stitched in place.
Side seamed or centered zippers are simple to sew by hand, and because you have complete control over the process, the quality and durability are higher.
Use these tricks and methods to fix worn-out zippers on your clothing or to add zipper closures to the outfits you created from inception.

---

Veel Gestelde Vragen

---

Other sewing projects you may like