Comment faire un nœud de couture ?

After learning how to thread a needle, the next step is to learn how to tie a sewing knot. Sewing requires the ability to tie knots, and many people give up on the craft entirely because they find the process very difficult. Even though a knot only needs a space of less than three millimeters, it can be very difficult to tie it up properly. Your sewing won’t come out well in the absence of a tight knot.
Check out the various ways to tie a knot shown below and pick the one that seems the simplest to you.

What is a Sewing Knot

Before moving on to how to tie a sewing knot, let’s first understand what a sewing knot is. The two main types of sewing knots are:

• Single threaded knot

When a knot is referred to as “single-threaded,” it only covers one end of the thread. The single-threaded knot is perfect for work that needs to be kept secret and is very delicate. Additionally, this is how a knot is tied for any decorative or embroidery stitching projects. Cut the thread’s end, then make a basic knot on one end. There you go, you have a single-threaded knot.

• Double threaded knot

There are two strands of thread in the double-threaded knot. Strong seams are the product of a double-threaded knot. Everything except decorative and embroidery sewing can be done with it. When the two tails of the thread are even and the thread is well through, tie the ends together. You can start using your double-threaded knot.

How to tie different types of sewing knots

There are several ways to tie a knot in the thread. We have mentioned step-by-step guides for each method.

Tie a knot using your hands

To complete sewing, you can tie a knot using your hands. Due to the size of the thread, this is simple for some people and challenging for others. To create a loop, backstitch through your final stitch. With your forefinger, create two to three loops on the thread’s end. Here’s how to go about it:
Instead of pulling, thread your needle through the loop to create two loops. To make a third loop, insert your needle through the second loop and pull back. Next, spin it with your thumb to ensure that it is mixed up. To tighten the knot, carefully pull on the needle to close the other two loops.

Tie a knot using bullion knot twirls

A fascinating stitch for creating straightforward designs is the bullion knot. This is an extended knot that may be grouped together and used to create dense textures. The bullion knot, which is a minor component of the thread, is largely undetectable. After threading the needle, bring the thread end up against the needle eye. Twirl the thread two or three times over the needle. Pull the needle while passing the thread’s end under the final twirl. The thread tightens as you pull the needle and ease the twirls down it. To create your final stitch, pass the needle through your fabric. The knot in the thread will prevent this stitch from continuing. Once the thread is cut, your beautifully made knot will appear.

Tie a knot using a back stitch

Instead of moving the thread forward as usual, a back stitch is created by moving the thread backward. It handles curves with ease. Each stitch appears to be continuous since there are no spaces between them. Make a stitch on the fabric’s backside. The thread should be pulled through until a small loop forms. Pull the thread through the loop one more time with your needle inserted, creating another smaller loop. To firmly fasten both loops, insert your needle through the subsequent one. This results in a neat end knot that secures your stitching. To prevent the seams from coming apart, tie all sewing ends in this quick and simple manner.

Tie a knot using a tacking or locking stitch

The tacking stitch, which is also called the locking stitch, is mostly used to hold two pieces of fabric together while the real stitches are being made. This stitch is a method of securing the thread’s end rather than creating a knot. As it holds the thread in place, this stitch accomplishes the same task as the knot. Start a stitch on a couple of threads of your fabric after you finish stitching. With your needle, pick up two or three threads; return to the same spot and pick up two threads again, this time creating a loop. Keep the thread in a loop rather than pulling it flat. To create a knot, thread the needle back up through this loop and tighten it. To further secure it, add another loop and repeat the process.

Tie a knot using a loop knot stitch

By doubling a line over at its end and tying both thicknesses into a square knot in a fashion that leaves a loop, you can create a loop knot stitch. Another popular method for securing thread without a knot is this one. To begin, fold your thread in half along the middle. On one side, there will be a loop, and on the other, the tail. The tail is kept at a lesser length. Through the needle’s eye, pass both tails. Through the fabric, insert the needle. Insert the needle and bring it up through the fold in the thread without pulling the entire length out. Once it is firmly embedded in the fabric, tighten the thread.

Tie a knot using a double back stitch

A double back stitch is created by working two parallel rows of back stitch along a narrow shape and crossing from one side to the other to create a herringbone pattern on the other side. This stitch’s ability to be reversed makes it ideal for shadow work when used on translucent base fabrics like cotton lawn, cotton organdie, etc. A nice place to start is by sewing two backstitches on top of one another. Remove the needle from the thread when your sewing length is complete. Tie a knot resembling that of a shoelace with the thread’s two ends on either hand. Depending on the length of the remaining thread, you can tie it multiple times. Again, it’s not quite a knot, but more of a neat, flat way to keep the thread in place.

Tie a knot on a machine à coudre

With a sewing machine, you can quickly tie a knot to complete your stitching. The loop from the preceding stitch should pull through to the back in the form of a loop when you sew your line of stitching. A pin can be used to bring the loop through to the wrong side, after which two single threads can be knotted together. A starting and ending knot can be sewn quickly and easily using a sewing machine. As a result, making these knots does not require much effort. The seven basic ways to tie a knot in sewing are quick ways to start any sewing project, whether you are hand-sewing or using a sewing machine. There are some other knot stitches to take into account, and they are also important to comprehend.

Also read

Embroidery knots

Knots are just as important to embroidery as the various stitches are. With the help of embroidery knots, you can get your artistic idea onto the fabric more precisely and also add details and decorations. Let’s look at some common embroidery knots and how to tie them.

Tie a Embroidery starting knot

Any method of beginning an embroidery project with a knot is considered an embroidery starting knot. The easiest method is to tie a standard knot at the end of your thread and push your needle through the fabric from the back to the front so that the knot is hidden from view from the front and sits at the rear.

Tie a French knot

French knots are used in a lot of needlework designs to make them look three-dimensional and add more details. Come up where you want the French knot to be by using a single thread. Try to get as near to the hole as you can and wrap the yarn around the needle a few times while maintaining tension on the thread. Pull the twists tight while maintaining thread tension, then move the needle back one strand from the hole you encountered. Holding the knot, bring the thread back through. The remaining thread should be carefully pushed through until it forms a knot. Too much tension will cause it to draw back, so do not pull it too tight.

Tie a Coral knot stitch

Coral knots are sewn in rows. In order to fill in the shape of a pattern, you can stitch a single row or pile them together. The knots themselves add texture to your item and are a great way to add dimension and volume. Make a knot at the end of your thread, then, at the start of your line, insert the needle from the rear. Just above your marked line, push the needle into the fabric and bring it back up almost immediately below. Pull the needle through slowly at first. The working thread must pass over the needle and tuck in behind it. Keep a lumière tension on the thread as you drag the needle through until a secured knot forms and the knot falls into place.

Tie a Peking knot

This type of knot was used to fill patterns in expensive Chinese silk needlework, where rows of tiny knots were used. These knots are used to fill in patterns, and they have a beautiful impact, especially when shadings appear. Bring the needle out, leaving the thread on the left side. Wrap the thread around your left index finger and twist it to form a loop. Place the needle at a point inside the loop while maintaining the loop’s current shape.
When doing this, you can hold the loop in place with your left thumb. Do not remove the needle just yet. To tighten the loop to your desired size, start pulling on the loose end of the thread. Pull the needle all the way down. You will have a ring perched atop a knot.

Tie a Danish knot

The Danish knot shapes itself into a tiny triangle. Any embroidery project requiring a little triangle could be completed using it. Make a triangle shape by using three points and wrapping your thread around itself as you go. The most crucial thing is to avoid pulling too hard on your thread, as this can cause your shape to become twisted. Without pulling the cloth, insert the needle under the right-side stitch that connects the triangle’s two sides. Next, insert the needle underneath the stitch made on the right side to rejoin the triangle’s two sides. The thread is wrapped around the needle. Take out the needle. Take the needle just outside the loop to complete the stitch by anchoring it. The result is a Danish knot.

Also Read

The best way to tie a thread knot

Let’s look at some of the most typical techniques for tying a knot in thread for hand sewing.

Tying a knot around the finger

Between your thumb and index finger on your left hand, hold the end of the thread. Grab the thread near your left hand with your right hand’s thumb and index finger, leaving the remaining thread to hang in your right hand. Catch the thread loops between your thumb and index finger by wrapping the thread two or three times around your finger in a clockwise direction. The tip of your index finger should be closer to your thumb. As you run your finger back along your thumb, the threads will twist together and roll toward the tip of your finger.
Use the nail of your left middle finger to press the end of the twisted loop of thread into the pad of your thumb when it reaches the end of your finger. Hold the thread tightly, then release your index finger and use your right hand to pull the thread. So, the twisted threads will move toward the end of the thread and make a knot.

Tying a knot around the needle

Pass the thread through the needle’s eye. In your right hand, hold the needle; in your left, the thread’s end. A half-inch or so from the end of the thread, place the needle on top of it. Put one on the pad of your right hand’s index finger. Keep your position.
Wrap the thread twice or three times anticlockwise around the needle’s tip using your left hand. To keep the threads around the needle, grasp them with your right hand’s thumb and index finger. Push the needle carefully upward with your left thumb until the threads that are wrapped around it are almost at the needle’s eye. Place the needle’s tip between your left hand’s thumb and index finger. Then, raise the needle. Draw the wrapped threads down the length of the thread while dragging the needle up until a knot forms at the end.

Tying a knot with a loop

Match the two ends of the thread and fold it in half. They should both be threaded through the needle’s eye. The opposite end has to be looped. Insert the needle so that it points toward the front of the fabric from the rear. Make sure the loop stays on the back side when you pull it through the material. From the front to the back of the fabric, place the needle close to where it was previously. Slide it through the loop after pulling it through the fabric. Pull slowly until the loop is flush with the fabric and the thread is flat on the back.

Résumé

You need to be able to thread a needle and tie a sewing knot in order to fix a hole in your damaged clothing or put a button back on. At first, tying a knot might seem hard, but with practice, you’ll find that there are many different ways to do it. We really hope that this easy-to-follow guide has helped you easily learn how to tie a sewing knot so you can start hand stitching. Tell us about your experience in the comments section below.

---

Si vous êtes une couturière avancée, jetez un œil à notre meilleures machines à coudre, meilleurs livres de couture et meilleurs magazines de couture messages et si vous cherchez à obtenir un mécanique, à toute épreuve, piquage ou machine à coudre industrielle, jetez un œil à certains de nos excellents articles. Si vous êtes une couturière débutante, consultez notre meilleurs livres de couture pour débutants, meilleures machines à coudre pour débutants et meilleures machines à coudre sous $200 pour commencer.

Pour les articles liés à la marque, consultez Meilleure Bernette | Meilleur Bernina | Meilleur Brother | Meilleur Husqvarna Viking | Meilleur Janome | Meilleur Juki | Meilleur Singer |

Pour les meilleurs accessoires, vérifiez Meilleures chaises | Meilleures tables | Meilleur papier calque | Meilleures huiles pour machines | Meilleurs ciseaux et cisailles | Meilleurs pieds-de-biche | Meilleures aiguilles | Les meilleurs kits de couture |

Bonne couture.

Questions fréquemment posées